snow plow - (spring creek nv for sale in Elko, Nevada

$650

Introducing an affordable homeowner snow plow that allows easy plowing comfort from your heated truck or SUV!
Personal Plow Features
Lower Blade
To begin plowing snow, remove pin, lift blade one end at a time and lower it over push frame, then replace pin.
Just Drive Forward
When you start driving the snow plow automatically starts pushing snow, the blade is guided by a push frame that allows it to slide up and down with the grade of the terrain. The thick rubber cutting edge facilitates effective snow removal yet remains turf friendly.
Backing Up
Back up to take another pass. When driving in reverse the blade of the snow plow lies back skimming over the surface. When driving forward the blade automatically re-engages for plowing. There are no controls to operate, all you do is drive.
Lift Blade When Finished
When snow removal is complete, lift the blade back over the push frame into the transport position.
SnowSport Snow Plow FAQ:
How does the SnowSport™ Install to my vehicle?
The SnowSport™ utility plow hooks up to the front receiver (2" square tube) hitch, just like hooking up a receiver on a hitch used at the rear of a vehicle for towing trailers.
Is a front receiver hitch needed?
Yes, and it comes with the plow package along with instructions to install it.
How difficult is it to install the hitch and plow?
The front end hitches are designed to bolt in place on most models - occasionally, certain models may require drilling. The instructions are clear cut. The front receiver hitch is mounted to the vehicle and the push frame is plugged into the front receiver hitch. The plow simply hangs on the push frame.
Can I install the SnowSport™ Plow myself?
YES, the instructions are clear cut. If you do need assistance, call 1- between 9-5pm CST.Snowsport customers overwhelmingly say "it was simple and easy to install". The front hitch varies from vehicle to vehicle. Plan about 30 minutes to 1 hour depending on your level of experience. The plow is attached in minutes by plugging in the push frame and attaching the plow to it.
How easy is the SnowSport™ Plow to hook up or un-hook between jobs?
It's very easy. Just insert the push frame into the front receiver hitch and secure with pin. Then hang the blade one end at a time onto the push frame (can be done in less than a minute). Unhooking is just as easy.
How do you switch from transporting to plowing or from plowing to transporting?
The operator must manually unhook the plow and lower it for plowing. For transporting simply lift the blade, one side at a time, onto the push frame.
How can the SnowSport™ Plow operate without hydraulics?
The blade is secured by the push frame. As you push the snow, the blade travels up and down as needed by gravity. The rubber cutting edge is designed to cut through the snow but pass over the harder ground surfaces below and be gentle on grass. When you back up, the blade automatically lays back, skimming over the surface. Then you drive forward and the blade re-engages for plowing.
How well does the rubber cutting edge and box ends hold up?
The rubber cutting edge is 1" thick 6" high - made of a hard rubber compound. This has been tested and proven to provide years of service. It can be replaced relatively inexpensively.
What is the warranty?
The plow has a 1-year limited warranty. See the owners' manual for details.
Can I move the SnowSport from one vehicle to another?
Yes, the plow can be easily transferred to another vehicle, all you need is a front receiver hitch.
Is the SnowSport™ available for my vehicle?
It is available for most late model pickups and SUV's.
How much does the plow weigh?
The aluminum blade is about 110 lbs. The complete kit with blade, push frame, and hitch is about 225 lbs.
they retail for $1399.99+shipping;;;;;ONLY ASKING $650.00;;;;
Location: spring creek nv.


Similar categories
Nearby Cities
Popular searches
Copyright © 2024 Americanlisted.com, All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.